MnK profiles, all games
Every layout D3tx uses personally, ready to load.
- Fortnite, R6, WZ4, BO6, Rust, Apex and more
- All DPI configs included
- Works with all D3TX scripts
$45Package
Buy Keyboard on console
Mouse and keyboard support
The Cronus Zen turns mouse and keyboard into native controller input with console aim assist still active. Every device D3tx has verified or tested, plus full controller compatibility.
1
Plug MnK into the Zen
Mouse and keyboard go into the Zen hub. The console sees a normal controller.
2
Load your game profile
Pick the profile for your game and DPI in Zen Studio. Everything is pre mapped.
3
Match your DPI
Profiles include configs for all common DPI values. Smooth 1:1 feel, no floaty aim.
4
Aim assist stays on
Console aim assist keeps working on top of raw mouse input.
Verified hardware
Supported mice
Not listed does not mean not supported. Most HID compliant mice work; these are the tested ones. Bluetooth is never supported, so wireless mice need their USB dongle.
| Model | Connect | Sensor | Max poll | Max DPI | Notes |
|---|---|---|---|---|---|
| Logitech G502 HeroD3TX ✓ | USB | HERO 16K | 1000Hz | 16,000 | D3TX verified · extra buttons via G Hub |
| Cooler Master MM710 | USB | PMW3389 | 1000Hz | 16,000 | — |
| Cooler Master MM711 | USB | PMW3389 | 1000Hz | 16,000 | — |
| Corsair Harpoon RGB Pro | USB | PMW3327 | 1000Hz | 12,000 | — |
| Corsair IRONCLAW RGB | Wireless | PMW3391 | 1000Hz | 18,000 | USB dongle required |
| Corsair M65 Pro | USB | PMW3360 | 1000Hz | 12,000 | Sensor smooths over 2000 DPI |
| Corsair M65 RGB Elite | USB | PMW3391 | 1000Hz | 18,000 | — |
| Glorious Race Model O | USB | PMW3360 | 1000Hz | 12,000 | — |
| Logitech G Pro | USB | HERO 25K | 1000Hz | 25,600 | — |
| Logitech G403 | Wireless | HERO 25K | 1000Hz | 25,600 | Dongle required · buttons via G Hub |
| Logitech G502 Proteus | USB | PMW3366 | 1000Hz | 12,000 | Extra buttons via G Hub |
| Logitech G703 Lightspeed | Wireless | HERO 25K | 1000Hz | 25,600 | USB dongle required |
| Razer DeathAdder Chroma | USB | ADNS 3988 | 1000Hz | 10,000 | — |
| Razer DeathAdder Elite | USB | PMW3390 | 1000Hz | 16,000 | No onboard memory · DPI 450/900/1800/3500 |
| Razer DeathAdder Essential | USB | PMW3327 | 1000Hz | 6,400 | No onboard memory · DPI 400 to 6400 steps |
| Razer Naga Pro | USB | Focus+ | 1000Hz | 20,000 | Extra buttons via Razer Mouse Utility |
| Razer Naga Trinity | USB | PMW3389 | 1000Hz | 16,000 | 2 button plate default · others need Synapse |
| Razer Viper Ultimate | USB | Focus+ | 8000Hz | 20,000 | — |
| Redragon M612 | USB | PAW3104 | 1000Hz | 8,000 | — |
| SteelSeries Rival 500 | USB | PMW3360 | 1000Hz | 16,000 | Sensor smooths over 2000 DPI |
| SteelSeries Rival 600 | USB | TruMove 3 | 1000Hz | 12,000 | — |
| UTechSmart Venus Pro RGB | USB | PWM3335 | 1000Hz | 16,000 | — |
Supported keyboards
Some boards need BIOS mode to talk to the Zen. If yours is not here, ask in Discord. Devices get verified and added constantly.
| Model | Status | Notes |
|---|---|---|
| Aula F75D3TX ✓ | Works | No special requirements |
| HyperX Alloy Core RGB | Works | No special requirements |
| Logitech G213 | Works | No special requirements |
| Logitech G413 | Works | No special requirements |
| Logitech G713 | Works | No special requirements |
| Razer Ornata Chroma | Works | No special requirements |
| Razer Tartarus V2 | Works | No special requirements |
| SteelSeries Apex Pro | Works | No special requirements |
| Logitech G512 | Dual USB | Connect the cable with the keyboard logo |
| Logitech G815 | Dual USB | Connect the cable with the keyboard logo |
| Corsair K30 | BIOS required | Hold Win Lock + F1 about 5s |
| Corsair K55 | BIOS required | Hold Win Lock + F1 about 5s |
| Corsair K65 | Check firmware | BIOS and firmware dependent |
| Corsair K70 | Check firmware | Unplug, hold ESC, plug in |
| Corsair K95 | Check firmware | Unplug, hold B + S, plug in |
| Corsair K100 | Check firmware | Unplug, hold B + S, plug in |
| Corsair Strafe | BIOS every boot | F1 + Win Lock about 5s on every startup |
| FNATIC STREAK65 RGB | BIOS required | BIOS mode required |
Corsair BIOS mode
With Win Lock key: hold Win Lock + F1 for 5 seconds, release both.
No Win Lock key: unplug the keyboard, hold S + B, plug back in, release.
K100 / K95: unplug, hold B + S, plug in.
K70: unplug, hold ESC, plug in.
Strafe: F1 + Win Lock on every startup.
Get the best feel
Set mouse polling to 250 to 500Hz for best results on console.
Heavy RGB keyboards may need a powered USB 2.0 hub.
On PlayStation, keep the auth controller on the Zen's USB port.
Device not listed? Tell us in Discord and it gets verified.
Per the official Cronus list
Supported controllers
The Zen needs a wired original licensed controller for authentication. Full details at guide.cronus.support.
PlayStation 5
DualSense and DualSense Edge, full support. All PS5 console models. Native play via the Zen Link Wi Fi module, or the bypass method (D3tx has a full video on it).
PlayStation 4
DualShock 4 V1 and V2 over USB and Bluetooth (V2 needed for auth). Licensed pads: Astro C40 TR, Hori Mini Pad, Horipad FPS+, Nacon Revolution Pro V1/V2 and more. All PS4, Slim and Pro consoles (Pro: use the rear USB).
Xbox Series X|S and One
All Series X|S pads including Elite Series 2 and Core. All Xbox One pads including Elite V1/V2. USB or the Xbox Wireless Adapter, Bluetooth not supported. Licensed: Razer, Scuf, PowerA, PDP and more.
Packages
Get set up faster
1 on 1 MnK setup call
Live VC with D3tx. Full Zen and MnK setup, tuned to your sens, plus a free script.
- Personal voice call
- Complete MnK configuration
- One free script included
$45Package
Book MnK Config Builder
Build your config in the browser instead of by hand in Zen Studio.
- Per game presets, Warzone, Apex, R6 verified
- Full key mapping, sensitivity and curve control
- Exports a ready to load .zmk file
$0Free
Get MnK video guides on YouTube · Questions? Support channels.